- Self Lubricating
- 3 Piece Rod End
- Bearing - Female
Material
| BODY | Chromium-Molybdenum Steel Zinc
Plated | SUS630 Stainless Steel
Passivated |
| RACE | 410 Stainless Steel /
Heat Treated | 410 Stainless Steel /
Heat Treated |
| BALL | 440C Stainless Steel /
Heat Treated | 440C Stainless Steel /
Heat Treated |
| LINER | Teflon® / Fabric | Teflon® / Fabric |
Overall View
Part Number
Dimension
Dimensions in mm
| HRT3 | 3 | 16 | 7 | 5.25 | 30 | M3×0.5 | 16 | 7 | 9 | 3.5 | 8 | 18 |
| HRT4 | 4 | 18 | 9.5 | 7.75 | 32 | M4×0.7 | 8.5 | 11 | 10 | 16 |
| HRT5 | 5 | 20.5 | 11 | 8.75 | 35 | M5×0.8 | 19 | 10.8 | 15 | 4.5 | 12 | 15 |
| HRT6 | 6 | 20.5 | 37 | M6×1.0 |
| HRT8 | 8 | 23 | 8.25 | 41 | M8×1.25 | 22 | 12.5 | 17 | 6.5 | 14 | 14 |
| HRT10 | 10 | 26 | 12.5 | 10.75 | 46 | M10×1.5 | 24 | 14 | 19 | 15 | 8 |
| HRT12 | 12 | 34 | 16 | 13.25 | 57 | M12×1.75 | 32 | 18.5 | 24 | 20 | 10 |
| HRT14 | 14 | 36 | 17 | 14.25 | 60 | M14×2.0 | 33 | 19 | 7.5 | 8 |
| HRT15 | 15 | 38 | 18 | 62 | 34 | 20 | 25 | 8.5 | 21 | 11 |
| HRT16 | 16 | 39 | 19 | 15.25 | 63.5 | M16×2.0 | 35 | 22 | 27 | 9.5 | 23 | 10 |
| HRT17 | 17 | 41 | 20 | 68 | M16×1.5 | 37 | 23 | 28 | 24 | 12 |
| HRT18 | 18 | 43 | 16.3 | 74 | M18×1.5 | 40 | 24 | 30 | 10 | 26 | 10 |
| HRT20 | 20 | 45 | 22 | 76 | M20×1.5 | 41 | 25 | 13 |
| HRT22 | 22 | 52 | 19.3 | 85 | M22×1.5 | 47 | 28 | 36 | 12 | 30 | 6 |
| HRT25 | 25 | 70 | 35 | 25.3 | 105 | M24×2.0 | 54 | 42 | 50 | 14 | 43 | 15 |
| HRT28 | 28 | 75 | 110 | M27×2.0 | 58 | 44 | 56 | 15 | 47 | 14 |
| HRT30 | 30 | 78 | 37 | 26.3 | 120 | M30×2.0 | 62 | 48 | 60 | 16 | 51 |
Dimensions in mm
| HRT3 | 5.2 | 8.73 | 0.06~0.68
{0.6~6.9kgf・cm} | 14.7 | 1.96 | 30.89 | 5.14 | 29 |
| HRT4 | 5.8 | 11.11 | 31.38 | 3.53 | 43.34 | 7.15 | 35 |
| HRT5 | 7.8 | 13.49 | 27.94 | 5.09 | 34.91 | 5.78 | 40 |
| HRT6 |
| HRT8 | 10.9 | 15.48 | 0.12~1.13
{1.2~11.5kgf・cm} | 34.02 | 5.29 | 42.46 | 7.06 | 51 |
| HRT10 | 12.2 | 17.46 | 37.65 | 6.76 | 47.07 | 7.84 | 73 |
| HRT12 | 15.4 | 22.22 | 78.06 | 8.33 | 97.57 | 16.18 | 150 |
| HRT14 | 18.9 | 25.4 | 82.96 | 9.02 | 103.65 | 17.25 | 165 |
| HRT15 | 19 | 26.19 | 95.32 | 9.31 | 119.15 | 19.8 | 189 |
| HRT16 | 19.2 | 26.99 | 100.71 | 9.7 | 125.81 | 20.98 | 218 |
| HRT17 | 20.4 | 28.58 | 101.4 | 10.29 | 126.7 | 21.08 | 241 |
| HRT18 | 120.62 | 12.16 | 150.72 | 25.1 | 283 |
| HRT20 | 22.9 | 31.75 | 121.3 | 12.84 | 151.61 | 25.2 | 330 |
| HRT22 | 27.1 | 34.92 | 0.23~1.80
{2.3~18.4kgf・cm} | 156.21 | 15.1 | 195.25 | 32.55 | 580 |
| HRT25 | 32.3 | 47.62 | 302.43 | 20.88 | 378.04 | 63.05 | 1230 |
| HRT28 | 36.8 | 50.8 | 283.7 | 23.24 | 354.6 | 59.13 | 1620 |
| HRT30 | 40.4 | 54.77 | 271.93 | 24.81 | 339.89 | 56.68 | 1930 |
Notes
*1 Axial load indicates the smaller value of static load or proof load.
*2 By using SUS630 (CR-TYPE) as the body material, higher fatigue load can be attained.
1. Teflon® liner permanently bonded to race I.D.
2. Made to order only.
3. No load rotational breakaway:Low torque type: All size: 0.02N･mMAX (Radial clearance 0.05mmMAX)
*Please consult Minebea for availability of bearings in this series.
*Teflon® is a Du Pont registered trademarkFeature of a Product
- Suitable for High load application.
- Self-lubricating.
Consist of a spherical bearing staked into the Rod End body. They provide high strength, as main body material is chrome molybdenum steel (hardness 35HRC, tensile strength 980N/mm2{100kgf/mm2}). Material of spherical race is selected depending on applications, and therefore, 3piece Rod End can bear sever requirements.
